lestronic 24 volt battery charger manual

Lestronic 24 volt battery charger manual manual#

Either the 12 volt or 24 volt indicator light will glow RED to indicate the charging voltage when (1) the output plug is connected to the battery system, (2) the input cordset to a live input power circuit, and (3) the power switch is in the 'AUTO (l)' position. This model charger will automatically adjust its output voltage to properly charge either 12 volt 6 cell, or 24 volt 12 cell series-connected, lead acid battery systems. Remove the lower front panel to verify or change the mode setting for the specific battery type. The LIQUID or WET ELECTROLYTE setting allows the battery to charge to 2.5 to 2.6 volts per cell. Sliding the switch to GEL, SEALED or MAINTENANCE-FREE charges the battery to a maximum of 2.38 volts per cell. The charger battery type selector switch must be set correctly to charge either wet, or sealed, including gel cell, lead-acid batteries. Move switch to DOWN position for WET CONVENTIONAL LIQUID ELECTROLYTE battery NO ADJUSTMENT IS REQUIRED FOR 50 OR 60 HERTZ INPUT FREQUENCY. SET THE SELECT SWITCH TO 100 TO 125 FOR MEASURED AC INPUT VOLTAGES IN THIS RANGE, AND SET THE SWITCH TO 200 TO 250 FOR MEASURED AC INPUT VOLTAGE IN THIS RANGE. INITIAL INSTALLATION Move switch to UP position for GEL, SEALED, or MAINTENANCE-FREE batteryĬAUTION: MAKE SURE THE INPUT VOLTAGE SELECT SWITCH IS PROPERLY SET FOR THE MEASURED AC INPUT VOLTAGE. IF YOU DO NOT FOLLOW THESE SAFETY INSTRUCTIONS, INJURY OR PROPERTY DAMAGE CAN OCCUR. IT MEANS: BECOME ALERT-YOUR SAFETY IS INVOLVED. LOOK FOR THIS SYMBOL TO POINT OUT SAFETY PRECAUTIONS.

Lestronic 24 volt battery charger manual manual#

DO NOT DISCARD THIS MANUAL AFTER READING. PLEASE SAVE THESE IMPORTANT SAFETY AND OPERATING INSTRUCTIONS For correct operation of the equipment, it is important to read and be familiar with this entire manual before installing and operating the charger. LESTRONIC DV AUTOMATIC 12 OR 24 VOLT DUAL OUTPUT DUAL MODE BATTERY CHARGER MODEL 16350